Workplace and Jobsite Health & Safety, Hazard, Industrial Hygiene and OSHA Training Courses

Occupational Safety Consultants offers onsite safety training to help your company work risk free

Occupational Safety Consultants offers the following onsite training and classes for the general industry:


Aerial and Scissor Lifts
This course is designed to train employees on the specific equipment used in your workplace. A formal lecture, which identifies the hazards and controls of aerial lift use, will be followed by a hands-on session, in which students will be required to demonstrate their ability to operate the lift. Topics covered will include falls and fall protection systems for the lifts in use, working around overhead energized electrical equipment, operator inspection and testing of the equipment, and emergency descent procedures. This course is customized to the specific equipment in your workplace, which can include scissor lifts, aerial lifts, powered ladders, bucket trucks, and forklifts with personnel lifting cages.

< back to top >


Electrical Safe Work Practices & NFPA 70
One of the four major exposures to injury, on construction sites, is contact with live electrical current. According to the Bureau of Labor Statistics, contact with electrical current accounts for four percent of all fatal injuries that occur in the workplace. NFPA 70E is recognized as the industry standard for best management practices to prevent these events. This class is designed for those individuals working with and around electrical systems. Discussion focuses on electrical safe work practices and includes a: (1) review and discussion of the effects of electricity on humans and electrical safety work practices including lockout/tagout; (2) review and discussion of NFPA 70E requirements, tables and requirements for voltage meters and test equipment; (3) review and discussion of required Personal Protective Equipment, Voltage Rated tools, their care and use; and (4) hands-on and table top exercises to demonstrate lessons learned.

< back to top >

Fall Prevention and Protection
Falls are the second leading cause of death each year. More than 10,000 people are killed each year and 200,000-300,000 people are disabled in some way. Upon completion, participants will be able to:

  • Understand OSHA’s Fall Protection requirements.
  • Determine the environments where falls can occur.
  • Select appropriate fall protection systems to be used.
  • Understand the uses of protective equipment to protect the worker and prevent falls.

Personal Fall Arrest Systems
This course provides an overview of state-of-the-art technology for fall protection and current OSHA requirements. Topics covered include the duties to provide fall protection, the principles of fall protection, the components of fall arrest systems, the limitations of fall arrest equipment, and OSHA policies regarding fall protection. The course features hands-on exercises demonstrating fall protection equipment. Upon completion of the course, students will understand the requirements for personal fall arrest, work positioning and fall restraint systems and be able to calculate free fall and clearance distances.

Fall Protection—Maintenance Personnel
This section will focus on the recognition of fall hazards that are common in the industrial workplace, how to control the hazards and an overview of the different types of equipment available for worker protection. This course is designed primarily for maintenance personnel who often find themselves working at heights. Special emphasis will be placed on ladder use, scaffolds, aerial and scissor lifts, and maintenance work performed on roofs. Upon completion of the class students will be able to identify fall hazards in the workplace and the appropriate fall protection methods to use including guardrail systems, personal fall arrest systems, fall restraint and work positioning.

< back to top >


Ladder Training*
One of the most overlooked and often used pieces of equipment in the workplace is the ladder. Each year thousands of accidents occur from falls from ladders, 50% of which result in lost time averaging around 12 days.

This class is designed to instruct students on the proper selection, set up, inspection, use and maintenance of various ladders found in the work environment. These include self-supporting ladders (step ladders), supported ladders (extension ladders) and fixed ladders.

Upon completion of this course, participants will understand the fundamentals of ladder use, fall protection equipment, and the hazards commonly associated with ladders.

The course encompasses both OSHA regulations as well as the requirements set by the New York State Code Rules. Participants will take a short multiple-choice quiz at the end of the discussion to determine their comprehension of the subject matter.

*Available in Spanish.

< back to top >


Powered Industrial Truck (Forklift) Training
This course is for lift truck operators and employees who work in close proximity to lift trucks. Training covers the safe operation of the many types of powered industrial trucks that are used in the workplace. The trainer uses a combination of formal instruction (classroom), practical training (demonstrations performed by the instructor), and an evaluation of the operator’s performance in the workplace. Emphasis is placed where participants need it most—on the safe operation and maintenance of powered industrial trucks. OSHA standards are highlighted to illustrate the significance and application of key training points.

The training and evaluation will be specific to the equipment your workers use and can include the following vehicles:

  • Forklifts
  • Narrow-aisle machines—stand-up forklifts
  • Order-pickers
  • Industrial tow tractors
  • Rough terrain forklifts and lulls
  • Industrial burden carriers—scooters
  • Industrial floor cleaning equipment—sweepers & scrubbers
  • Powered and non-powered pallet jacks and hand trucks

Numerous topics will be covered, including:

  • Operating instructions, warnings, and precautions for the types of trucks the operator will be authorized to operate
  • Differences between the truck and the automobile
  • Truck controls and instrumentation—where they are located, what they do, and how they work
  • Engine or motor operation
  • Steering and maneuvering
  • Visibility (including restrictions due to loading)
  • Fork and attachment adaptation, operation and use limitations
  • Vehicle capacity
  • Vehicle stability
  • Vehicle inspection and maintenance the operator will be required to perform
  • Refueling and/or charging and recharging of batteries
  • Operating limitations
  • Other operating instructions, warnings or precautions listed in the operator's manual for the types of vehicle that the employee is being trained to operate
  • Surface conditions where the vehicle will be operated
  • Composition of loads to be carried and load stability
  • Load manipulation, stacking, and un-stacking
  • Loading Semi-trailers, railcars and freight elevators
  • Pedestrian traffic in areas where the vehicle will be operated
  • Narrow aisles and other restricted places where the vehicle will be operated
  • Hazardous (classified) locations where the vehicle will be operated
  • Ramps and other sloped surfaces that could affect vehicle stability
  • Closed environments and other areas where insufficient ventilation or poor vehicle maintenance could cause a buildup of carbon monoxide or diesel exhaust
  • Other unique or potentially hazardous environmental conditions in the workplace that could affect safe operation

Upon the successful completion of the training and evaluation, the operator will receive an Operator Card listing the vehicles that he or she has been evaluated as competent to operate.

< back to top >


Scaffolds*

Scaffold Training—Competent Person
This class is designed for those individuals that will be considered competent people. The course focuses on the different hazards associated with both scaffold construction and use. Topics to be discussed include, scaffold construction, load considerations, proper access, fall protection and working around energized power lines. This one-day class will consist of classroom lecture as well as a hands-on lab where students will be required to participate in the construction of scaffolds.

Scaffold Training—User
This course is designed for employees required to work on scaffolds. Upon completion of the course, participants will be able to recognize hazards associated with scaffold use, including falls, scaffold collapse, overloading, improper access and working around or near overhead energized electrical power lines. Upon completion the student will be able to identify what measures must be taken to ensure their safety while working on scaffolds.

*Available in Spanish.

< back to top >


Welding Supervision
This course is designed for individuals responsible for authorizing cutting and welding operations. Supevisory personnel will learn what is necessary to ensure a safe welding environment for workers, including the safe handling and use of equipment in the cutting or welding process, how to identify combustible materials and hazardous areas, how to protect combustibles from ignition and fire protection. Classroom activities focus on several areas, including fire hazards, fire watch requirements, hot work permit, health hazards, and welding in confined spaces. Hands-on activities, such as becoming familiar with welding equipment and their inspection, will be performed in the organization’s welding shop in conjunction with onsite welders.

< back to top >


OSHA—10 Hour General Industry
Our OSHA 10-Hour General Industry course provides entry-level workers general awareness to recognize and prevent hazards commonly found in the workplace. The training covers a variety of industry safety and health hazards, emphasizing hazard identification, avoidance, control and prevention. Our goal is to work with our clients to cover topics specific to their industry and can include the following:

Mandatory topics (6 hours):

  • Introduction to OSHA
  • Walking and Working Surfaces, including Fall Protection
  • Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection
  • Electrical
  • Personal Protective Equipment
  • Hazard Communication

Plus, at least two elective topics (2 hours):

  • Hazardous Materials
  • Materials Handling
  • Machine Guarding
  • Introduction to Industrial Hygiene
  • Bloodborne Pathogens
  • Safety and Health Program
  • Fall Protection

Plus, 2 hours for optional topics:

The remaining 2 hours will cover other general industry hazards or policies and/or will expand on the mandatory or elective topics listed above.

< back to top >


OSHA—30-Hour General Industry
Our OSHA 30-Hour course provides a variety of training to workers with some safety responsibility. In addition to emphasizing hazard identification, avoidance, control and prevention; the student will also be introduced to the OSHA standards. By introducing our students to both the common hazards found in industry and the regulatory knowledge to remain in compliance, we reach our goal of providing students with the resources to be an effective safety and health manager at their facility.

Mandatory topics (11 hours):

  • Introduction to OSHA
  • Walking and Working Surfaces, including Fall Protection
  • Exit Routes, Emergency Action Plans, Fire Prevention Plans, and Fire Protection
  • Electrical
  • Personal Protective Equipment
  • Materials Handling
  • Hazard Communication

Plus, at least five of the following topics (10 hours):

  • Hazardous Materials
  • Permit-Required Confined Spaces
  • Lockout/Tagout
  • Machine Guarding
  • Welding, Cutting and Brazing
  • Introduction to Industrial Hygiene
  • Bloodborne Pathogens
  • Ergonomics
  • Fall Protection
  • Safety and Health Programs
  • Powered Industrial Vehicles

Plus, 9 hours for optional topics:
The remaining 9 hours will cover other general industry hazards or policies and/or will expand on the mandatory or elective topics listed above.

< back to top >


OSHA 16-Hour Course—Maintenance Worker
Originally designed to be presented to college and university maintenance staff, this course has been adapted to facility maintenance and property management companies that often find that their jobs involve both maintenance and construction activities. This two-day (16 hour) course is designed to offer a wide variety of awareness training in general industry while highlighting common hazards in construction and understanding different ways to control or abate such hazards.

Topics include:

  • Introduction to OSHA
  • Exit Routes and Emergency Action Plans
  • Electrical Safety
  • Fall Protection/ Working Walking Surfaces
  • Hazard Communication
  • Machine Guarding
  • Hand and Portable Power Tools
  • Scaffolding
  • Welding and Hot work
  • Lockout /Tagout
  • Ladders
  • PPE*/ Respiratory Protection
  • Introduction to confined spaces
  • Excavation and Trenching Safety
  • Material Handling

Upon completion of this course each student will receive an OSHA 10-Hour General Industry Outreach Training Program card.

*Personal Protective Equipment

< back to top >


Confined Space, Permit Required
Upon completion of the course students will understand how to evaluate and determine whether a space is confined space or a permit-required confined space. They will also learn to develop confined space entry and rescue procedures that identify the hazards of entering confined spaces in their workplace. Discussion will also focus on the importance of rescue procedures while working in confined spaces and help the audience evaluate the capabilities of their designated rescue team to respond to confined space emergencies.

< back to top >


Machine Guarding
OSHA’s most frequently cited regulation each year is the general requirements for guarding machines. Students will be able to identify various machine hazards as well as the application of OSHA’s machine guarding requirements to specific equipment. The class will also discuss safe work practices when using various types of hand and power tools. Upon completion of the course, the student will be able to identify hazards associated with machines and proper guarding requirements to help minimize and eliminate worker exposure and injuries.

< back to top >


Hazard Communication*
Each and every day, workers in this country are exposed to thousands of chemicals in the workplace. Repeated exposure can have severe affects on the safety and health of employees. This class will focus on the hazards associated with the use of various types of chemicals commonly found in the workplace and controls to minimize employee exposure. By the conclusion of the course, the student will understand the need for a Hazard Communication Program, product labeling requirements and how to read a Material Safety Data Sheet (MSDS).

*Available in Spanish.

< back to top >


Personal Protective Equipment (PPE)*
This course is designed to cover the different types of personal protective equipment used in the workplace, including safety glasses, hearing protectors, gloves, hard hats, respirators and safety shoes. Students will learn how to conduct a personal protective equipment assessment and will be able to properly select, inspect and use the forms of personal protective equipment needed in the workplace.

*Available in Spanish.

< back to top >


Recordkeeping
This course is designed to assist employers in identifying and fulfilling their responsibilities for posting and maintaining OSHA’s records of illnesses and injuries. Practical exercises are designed to ensure that participants who successfully complete this course will be able to identify OSHA-recordkeeping requirements, determine if an injury or illness is work-related, and be able to complete OSHA's forms 300, 300A and 301.

< back to top >

Industrial Rigging
This course is designed to discuss the use, care, maintenance, and inspection of various below-the-hook lifting devices, including alloy-chain slings, wire-rope slings, nylon slings, clevis, eyebolts, hooks and plate grabs. The course encompasses both formal lecture and hands-on exercises to assist the students in the proper selection and use of lifting devices, as well as the various types of hitches and configurations. Students will be given practical examples to demonstrate their application of the information learned.

< back to top >


Overhead Cranes
This course is designed specifically for overhead crane operators. Both formal lecture and hands-on training are used to discuss the hazards of overhead crane operation, operator inspection requirements, employer inspection requirements and basic rigging applications. The hands-on portion includes student operation of the cranes in your facility, including cab-operated, pendant, pulpit or remote control cranes.

< back to top >


Welding/Cutting
This course is designed for individuals involved in cutting and welding operations. Students will learn what is necessary to ensure a safe welding environment, including the safe handling and use of equipment in the cutting or welding process, how to identify combustible materials and hazardous areas, and how to protect combustibles from ignition. Classroom activities focus on several areas, including fire hazards, fire watch requirements, hot work permits, health hazards, welding in confined spaces, and the safe use, handling and storage practices for various types of compressed gases.

< back to top >